Pre-filling syringe's.,good or bad?

[toppjimie]

I want to Pre-fill 2 weeks worth of test prop so it saves alittle time.Thats 8 syringes.does anyone also do it? My question is " the test wont degrade any being in the plastic syringes will it"?

[bronco]

Nope absolutely nothing wrong with, I've done it many times

[Tattz]

It remains sterile. I've done it ..

[Hermes]

I think most like this approach because it creates the opportunity for consistency, and so you don't miss a dose, just put them in a zip lock back and keep them room temp and you're set!

[swinging_away]

Nope absolutely nothing wrong with, I've done it many times

it is a great time saver, drawing needle stock saver and helps you stay on schedule too because it is ready to go

store needle-side up so they do not drain out.

[grizzlylongcut]

one side note is that if your gear has EO in it it tends to dissolve the rubber plunger, other than that i use to do it all the time

[texson]

you're good.

[bronco]

one side note is that if your gear has EO in it it tends to dissolve the rubber plunger, other than that i use to do it all the time

I tested this, I put 1ml of test 300 that I know has EO in it and let it sit for 6 months, plunger never dissolved one bit that I could tell

[texson]

^^^^ no. but I have seen it before. takes longer than what those loads will last him, though.

[pulooooooo]

I started doing prefill for eod shots..

[Jshredz]

I always pre-load at least 4 syringes at a time your gtg bro

[Gopro]

Good to know. I have pre-filled before but was always scared i would get infections or the gear becomes unsterile, but i guess im pre-filling for the most part from now on.

[ram97!]

I predraw a weeks worth all the time makes pinning quicker and less time consuming....works great for me...

[shooter29]

Currently preloading my prop 2 weeks out. Makes covert pinning quick and easy!

[lith56]

Ive done it with test/deca when we were heading to our place at the beach for a few days

[grizzlylongcut]

I tested this, I put 1ml of test 300 that I know has EO in it and let it sit for 6 months, plunger never dissolved one bit that I could tell

im sure the % of EO will make a difference, i know when i first tried EO when making a homebrew.i drew up 3ml of pure EO and in about 3 secs the plunger swelled up and was very hard to pushout. ive read there was different grades of EO,maybe mine was cheap,but after that i never used it again. but thats just me alot of guys really like gear with EO

[toppjimie]

wow.,everybody does kool.So i'll sat at the kichen table with my Protein shake and a start Filling..,woowoo!!

[TexxGearsRep]

It can be done, I do it time to time.

[metromuscle]

I've done it at times, but I don't leave it in the pin too long of a time. I do leave the mixed HGH in a 3cc reg pin in the refrigerator and draw out of it with the insulin pin. Works great that way.

[keith1569]

Currently preloading my prop 2 weeks out. Makes covert pinning quick and easy!

Yep!

[Jacked]

GREAT TO KNOW...THANKS FOR STARTING THIS THREAD!!! I HAVE BEEN WONDERING MY SELF

[hibye]

I second that

GREAT TO KNOW...THANKS FOR STARTING THIS THREAD!!! I HAVE BEEN WONDERING MY SELF

[Sleeper]

Sunday afternoons = cook for the week and freeze + pull up all injections for the week. Great time savers.

[hibye]

Sunday afternoons = cook for the week and freeze + pull up all injections for the week. Great time savers.

Do you warm up your needles over hot water? I always warm up my oil.

[Actuated01]

I dont let anything touch my needle other than the stopper which i wipe with an alcohol pad first. After that the cap goes back on until i am ready to inject. You may try running the syringe under warm water a bit but if it were me i wouldnt run the needle under water.

[crush]

Do you warm up your needles over hot water? I always warm up my oil.I always pre load its just better for me to have them ready to go,and I dont run them under warm water. Ialways use 2 pins as well. One to draw with and the other to pin with. Nothing worse than stabbin with a dull needle.

[Boltbreaker]

I always Pre Load 2 weeks out your GTG Top

[swinging_away]

Don't let the needle touch tap water!

Cap it, then cuff it with your hand while holding a paper towel in the same hand for added protection and coverage.

run the syringe part under warm to hot water for a minute or two to thin the oil.


Another method would be to use a heating pad

[Joker]

Do you warm up your needles over hot water? I always warm up my oil.

I always stick my syringes between my ass cheeks for an hour or so....warms that oil right up........ ; )

[sofargone561]

ive never done it before. but this next cycle i will be pinning ED so i will probably draw a weeks worth at a tme

[www.37]

I always stick my syringes between my ass cheeks for an hour or so....warms that oil right up........ ; )
Wow never thought of this. I figured using a hair dryer on the syringes while rotating it making sure not to melt them was a good idea. Man what was I thinking