Needles

[Joseph]

Hey brothers, gonna be injecting 3ml everyday and was wondering what the smallest needle I could use would be? Since it's gonna be quite a bit of pinning I would like to reduce the amount of scar tissue buildup as much as possible. I got quite a bit of time on my hand so I'm not worried about it taking awhile to pull the oil.

I normally use 25g, 5/8 but I've never done e/d injections with short esters before so advice would be appreciated.

[PAiN]

25g should be fine.

The size needle really depends on the gear. I have injected some gear that would go through a slin pin and some that would barely go through a 23g.

[HARD AT IT]

^^^ Agreed for sure!!!

[animal87]

Yea 25g is what I use. I draw with a 23g and then switch to the 25g 1 1/2" for inject.

[Joseph]

Alright I'll stick with the current size. Thanks bros.

[hunkstrum]

25g should be fine.

The size needle really depends on the gear. I have injected some gear that would go through a slin pin and some that would barely go through a 23g.

Agreed. 25 will work with about anything, you just might have to press a bit longer if its a thicker solution. I'd use at least an inch though / prob an inch and a half if you're doin 3ml. You don't want anything coming back out on you.

[kubes]

Hey brothers, gonna be injecting 3ml everyday and was wondering what the smallest needle I could use would be? Since it's gonna be quite a bit of pinning I would like to reduce the amount of scar tissue buildup as much as possible. I got quite a bit of time on my hand so I'm not worried about it taking awhile to pull the oil.

I normally use 25g, 5/8 but I've never done e/d injections with short esters before so advice would be appreciated.
Like said above 25 gauge is probably fine. I have been back loading insullin syringes and pinning ed that way. I am only pining 1 ml at a time this way though. Less scar tissue this way

[bdad]

Hey brothers, gonna be injecting 3ml everyday and was wondering what the smallest needle I could use would be? Since it's gonna be quite a bit of pinning I would like to reduce the amount of scar tissue buildup as much as possible. I got quite a bit of time on my hand so I'm not worried about it taking awhile to pull the oil.

I normally use 25g, 5/8 but I've never done e/d injections with short esters before so advice would be appreciated.

Except for certain small muscle groups I never use shorter than a 1 inch.

[Khem]

I hit every muscle group with 1inch and bury. I don't hit glute's though.

[bone]

I cant even imagine pushing oil through a 25ga pin other then a 5/8's.When ever I do use those little pins with that much oil I'll pull out and hit a second spot,left right delts tris and so on.I always have 1-1/2 23's and 5/8's 25's on hand.large pins large muscles small pins small muscles.If you dont care to have multiple size pins just buy 1-1/2's you can cut the sheath of the pin with a scissor to any size and place it back on the pin as a stop.

[Khem]

Cut the sheath of the pin? What are you talking about? That sounds unsanitary and unsafe too lol

[Joseph]

Sorry bro but I ain't cutting my pin with fucking scissors then injecting my self with it lol.

[bone]

Yes a sheath is the plastic cover that protects the pin.You only need to cut one.You can use it over and over again.You pull the new one off and then slide the one you've cut with a scissor on.Its in no way unsanitary I used that method for years.Was just trying to help if you dont wanna buy different sized pins

[Khem]

Yes a sheath is the plastic cover that protects the pin.You only need to cut one.You can use it over and over again.You pull the new one off and then slide the one you've cut with a scissor on.Its in no way unsanitary I used that method for years.Was just trying to help if you dont wanna buy different sized pins

Ohh You're talking about using the plastic cap as a depth guard... Gotcha.

[kubes]

Yes a sheath is the plastic cover that protects the pin.You only need to cut one.You can use it over and over again.You pull the new one off and then slide the one you've cut with a scissor on.Its in no way unsanitary I used that method for years.Was just trying to help if you dont wanna buy different sized pins

I am way to lazy to do that i just buy more pin sizes... Lol

[bdad]

I use 1.5 for glutes, but they are getting harder to reach.

[kubes]

I use 1.5 for glutes, but they are getting harder to reach.

Your lats are getting to big and they are in the way right? Lol

[Joseph]

I thought he meant to cut the actual pin lmao

[bone]

I was afraid thats what you were thinking buddy....No worries!

[Joseph]

I was afraid thats what you were thinking buddy....No worries!

Was beginning to think I wasn't tough enough to be apart of this board. Cutting pins in half and injecting and shit. lol

[VIOLATER]

25g should be fine.

The size needle really depends on the gear. I have injected some gear that would go through a slin pin and some that would barely go through a 23g.

Yep...pretty much summed it up

[skyrim]

Sorry for the dumb question, but for new guys like myself, is there one company that is better as far as needles and since I am looking at a very basic cycle, and ideas of what sive needles to use?

[Rooroo]

Sorry for the dumb question, but for new guys like myself, is there one company that is better as far as needles and since I am looking at a very basic cycle, and ideas of what sive needles to use?

Terumo makes very good pins.
Here is a pic of the two I'm using right now . Actually this is a pic of them still in wrapper.
I generally us 25 g 1" in my delts , tri's or lats .
I use 22 g 1 1/2" in my glutes.
If u need a source to order them from let me know .
Also I generally use the faster acting esters in the delts , tri's and lats and loner esters in Glutes or quads .
Generally is the key word there because I've tried just about every combo known to AAS .
http://img.tapatalk.com/d/14/02/13/aha4uruz.jpg

[AndyL]

I've always used 22 guage - 1 inch needle to withdraw and inject .

[bdad]

GPZ

[08gsxr]

Terumo makes very good pins.
Here is a pic of the two I'm using right now . Actually this is a pic of them still in wrapper.
I generally us 25 g 1" in my delts , tri's or lats .
I use 22 g 1 1/2" in my glutes.
If u need a source to order them from let me know .
Also I generally use the faster acting esters in the delts , tri's and lats and loner esters in Glutes or quads .
Generally is the key word there because I've tried just about every combo known to AAS .
http://img.tapatalk.com/d/14/02/13/aha4uruz.jpg

Yes! Terumo is what I use. Sharp little bastards. I pin my pecs and delts and tris with 25guage 5/8. I pin the quads and glutes with 25 guage 1inch.

I have seen a guy take an 18guage to the quad and it made my nuts shrivel after seeing it. It sounded like a rubber band being slapped on the skin

[skyrim]

So it looks like terumo and at least 1"? What is gpz?

[Rooroo]

So it looks like terumo and at least 1"? What is gpz?

Terumo is what I have on hand and just one good example of a quality syringe and needle combo.
GPZ is great source for pins.

[enrod]

gpzservices bro.

I shoot with 25g in quads/delts 1in and draw with 22g pins. They offer deals at gpz with all the pins you need and alcohol swabs, can't beat them.

[Rooroo]

BTW no matter how low the price stay away from Oasis syringe and needles .
Ordered them by mistake and I regretted it every single pin because they hurt that bad!! My wife refuses to pin me if she has to use them .

[skyrim]

Awesome. Thanks guys. I'm going to order those tonight.

[dc_812000]

you will be fine with a 25g 1'' and get a 23g for the draw.

dc.