Carrier Oil Ratings by Ex-Pharmacist

[zenstyle]

Found this the other day if you are interested.

Castor 297.0 - Thickest
Crambe 53.6
High-Oleic Safflower 41.2
Peanut 39.6
Sunflower 37.1
Grapeseed 37.0 (most used for home brew)
Sesame 35.3
Corn 34.9
Cottonseed 33.5 (most used for commercial)
Soybean 32.6
Safflower 31.3 - Thinnest

If buying safflower make SURE it not the high oleic. Safflower will also last longer than grapeseed before going rancid

A lot of the newer oils as you'll notice (e.g. MCT, Apricott, Avacado, etc.) are not listed. However, that doesn't mean they are not just as good if not better.

[cominback22]

Interesting info. Thanks brother.

[Woods]

Great information thkz

[SJ2469]

Very good to know! Thanks for the post, brother.

[Ole Deisel]

Awesome, thanks for the info.

[Woods]

Anybody know what MTC oil is ?

[Beastie]

medium chain triglyceride oil..

[bobhead]

Thanks!

[CrazySteroids]

Good info,thanks brother.

[TEPENEX]

medium chain triglyceride oil..

110% spot on as well as castor oil for less pip and to keep raw in solution or emulsion.

[fitraver]

My script uses safflower. I can draw it from the vial in a 30ga. Same with mct. New stuff I have coming is GSO. Hoping it can still be drawn. Anyone else tried drawing into a 30ga slin with gso?

[Woods]

medium chain triglyceride oil..

No that's not what I meant lol !! So safflower is the thinnest on the post how much thinner is the mtc oil?

[ski748134]

Pretty thought with gso it's a bit thicker them MCT I always used a 25 but u can warm up oil with a heating pad and thin it out to use slin Pins

[TEPENEX]

^ Slin pins work great if your BF is low enough to get in far enough.

[fitraver]

^ Slin pins work great if your BF is low enough to get in far enough.

Even if not it just ends up being sub q which works too. But yeah I hit my VG, quads and delts easy with a 1/2"

[TEPENEX]

Even if not it just ends up being sub q which works too. But yeah I hit my VG, quads and delts easy with a 1/2"

1/2" is the way to go, I have heard of problems with guys getting oil stuck subcutaneously, I know bro logic doesn't say so but just be careful.

[fitraver]

1/2" is the way to go, I have heard of problems with guys getting oil stuck subcutaneously, I know bro logic doesn't say so but just be careful.

I was tempted to pin my ass the other day with one and see how it went but I didn't haha. I did use a 1" tho vs 1 1/2" and all seems fine.

[Aintstrongyet]

I was tempted to pin my ass the other day with one and see how it went but I didn't haha. I did use a 1" tho vs 1 1/2" and all seems fine.
I use a 1 inch and pin all the way into my chest.

[TEPENEX]

I was tempted to pin my ass the other day with one and see how it went but I didn't haha. I did use a 1" tho vs 1 1/2" and all seems fine.

lol ...I have done this with a 1/2 cc and just push it in a little farther I am an Ecto Meso so I don't a long pin.

[TEPENEX]

I use a 1 inch and pin all the way into my chest.

They work great for pecks tris bis etc.

[Des28]

Does it matter where I source the oil? like my local grocery store? It all ends up going through filtration anyways, right?

[Woods]

It does matter cause some oils have high acid content which will cause a burning with the pin .