Cloudy tren a

[Zeus_100]

Ok so I have been warming up my tren A daily in a bathe of hot water that is dispensed from those 5 gallon water things for more than 3 to five mins .. .. I know the water comes out hot but not.too hot..

I heat up so it goes I'm smoother and I heard it helps with any pip ..

The only thing I've noticed is towards the end of my vial and after a few hot.bathes the oil becomes cloudy once cooled ..

Right after I let it.dip in water it clears up..

Dont know if it cause my apt.get cold during the day that it affects the oil or could it be the warming up.. process

Am I degrading it

Right is a fresh vial
Left is cloudy one
. https://uploads.tapatalk-cdn.com/20180625/f8e53bd99fe8ff91df637bd487c57c5a.jpghttps://uploads.tapatalk-cdn.com/20180625/430848094d6fed86846e316b72addcc0.jpg

Sent from my SM-G950U using Tapatalk

[bigpapapumpaf]

The heat will cause oxidation but as long as the temps are not too high you shouldn't hurt it.

Have you ever tried just warming the gear up in the pin? Hold it between your fingers or something for a few mins to warm it up.

BPP

[Zeus_100]

The heat will cause oxidation but as long as the temps are not too high you shouldn't hurt it.

Have you ever tried just warming the gear up in the pin? Hold it between your fingers or something for a few mins to warm it up.

BPPI used to warm up in the pin but found it easier just to dip the bottle in a hot bath..
The water temp isn't too hot..

Sent from my SM-G950U using Tapatalk

[bodean30]

That's always been my concern with heating up the whole vial versus just the pin. Temperature fluctuations are never a good thing for chemicals. I'm sure it's just fine but for my own peace of mind I just run the pin under warm water for a minute.

Sent from my SM-N920V using Tapatalk

[Zeus_100]

That's always been my concern with heating up the whole vial versus just the pin. Temperature fluctuations are never a good thing for chemicals. I'm sure it's just fine but for my own peace of mind I just run the pin under warm water for a minute.

Sent from my SM-N920V using TapatalkThat's what imma do next time..

Sent from my SM-G950U using Tapatalk

[JJ14]

That's always been my concern with heating up the whole vial versus just the pin. Temperature fluctuations are never a good thing for chemicals. I'm sure it's just fine but for my own peace of mind I just run the pin under warm water for a minute.

Sent from my SM-N920V using TapatalkYa I used to put the whole bottle under water but now I just do it after I draw up and it is in the pin. So much easier and quicker to heat up the little oil that's in the pin instead of all the oil in bottle. I've heard different opinions on it but never got a direct answer say if your heating it up to much will it be damaged or lose its potency not under sink or bath water if anything would have to go past it's melting point if it were to get damage or lose it's potency and ive read and heard the hormone gets cooked out but there's no proof of that to my knowledge i might be wrong. You would think if it's heated up to much what about the BA and BB also wouldn't that get damaged or evaporate I know one of them wouldn't just don't know which one I'm not a brew guy or chemist. Sorry got off track a little. I think your good bro

Sent from my SM-J700T using Tapatalk

[Boxsquatter]

Brothers and sista’s in my personal opinion and it’s mine. I think heating up gear is a waste of time and energy. Ok maybe if you are using a slin pin but what’s the sense. Does it really make that much of a difference. I have used 27, 30 g slin pins and I have use 18g harpoon’s when that’s all I had. So if heating it helps it flow better i don’t know. I don’t care what you put thru a 27g pin it’s going to flow slow. I use 25g all day every day biceps/calf’s /delts no problem and I don’t even feel them. Try them their is really no dif between 25-27g.

[Monqswole26]

Brothers and sista’s in my personal opinion and it’s mine. I think heating up gear is a waste of time and energy. Ok maybe if you are using a slin pin but what’s the sense. Does it really make that much of a difference. I have used 27, 30 g slin pins and I have use 18g harpoon’s when that’s all I had. So if heating it helps it flow better i don’t know. I don’t care what you put thru a 27g pin it’s going to flow slow. I use 25g all day every day biceps/calf’s /delts no problem and I don’t even feel them. Try them their is really no dif between 25-27g.

Always heat up my bottles on the heating pad prior.

[JohnDoe]

The only time I have ever heated up any gear is when it’s crashed and I want to re-dissolve/suspend it.

Use a 25g pin and unheated gear and you’ll be fine.

[Boxsquatter]

Always heat up my bottles on the heating pad prior.
I guess to each their own. A heating pad.? I just wanna draw that shit up and get it in me and be done with it. It’s to much romance involved in it. But hey if it works it’s all good. Tom morning when I get ready for my morning shot after I get outta the shower, I will take my bottles and when I am done drying my nutt sack with my wife’s hair dryer I will be sure to heat the vials up first.

[LowT]

I would never heat any gear to avoid PIP. I have however, like mentioned above, heated and/or added BA/BB if my stuff started to crash. And that's my own brew. If I get extremely bad PIP from a UGL, which has only happened twice, I just send it back so they can test it to see what's up.
Personally, a little pain is ok with me. The price we pay sometimes......

[Zeus_100]

I would never heat any gear to avoid PIP. I have however, like mentioned above, heated and/or added BA/BB if my stuff started to crash. And that's my own brew. If I get extremely bad PIP from a UGL, which has only happened twice, I just send it back so they can test it to see what's up.
Personally, a little pain is ok with me. The price we pay sometimes......Next cycle I'm going not heating going to pin regular.. see if it's any diff

Sent from my SM-G950U using Tapatalk

[balut45]

I heat mine in the pin before shooting... 25g. Might not make a difference other than psychologically+, but I have a whole weird routine I have to go through.