25 Gauge 3CC vs 25 Gauge 1cc slin

[meatneck71]

So, years and years ago when I first started cycling, I was given a batch of 25 gauge 3cc pins. It was pretty tough to push gear through them, so, when I started ordering them online, I went with 3CC 23 Gauge. I don't mind the larger gauge, even in my delts, but it's super painful to pin my quads and glutes. Recently, I purchased a bag of 100 25 gauge slins for bpc injections (that's all they had). In my attempt to man up to the quad injections, I figured, I'll start with one of those 25s. I couldn't believe how easy it was to push gear through it, plus the pain was minimal (hardly at all - even in the glutes). The only downside is that it's 1cc.

So, maybe the oil these days are just thinner, but I remember just so hard to push it.. Is it really easier with a 1cc or what?

thanks!

[balin]

Larger gauge pins require more pressure due to the diameter of the pin.

[maxmuscle1]

This is the truth. Eureka! It totally is a game changer when you switch to 1 ml barrels!!


Sent from my iPhone using Tapatalk

[Adrenaline]

25g 3cc 1inch

[maxmuscle1]

25g 3cc 1inch

Definitely 3cc syringes during bulking season. I Inject higher volume at one time. On cutting, using short esters I use the slin pin just cause of the frequent injections


Sent from my iPhone using Tapatalk

[meatneck71]

Larger gauge pins require more pressure due to the diameter of the pin.

Okay, makes sense to me, especially when the barrel is larger as well. Thanks for the input guys!

[leftkz]

Just recently... I experimented with using a 29g 1/2" slin pin for my delt. Surprisingly oil flowed pretty easily. I let my vial sit in some hot water before drawing and pinning.

Today I just used a 25g 1" 3cc pin for my delt. Slightly faster. Hurt a little bit more.