-
Originally Posted by
inhiding
When I make my gear I do it a little different
I take a small sauce pan with about 2 inches of water in it and start it to boil.
Then I take a 150 ml beaker and put my powder in it. Then I add my ba and bb to the powder in the beaker, and place the beaker in the boiling water. I heat the powder until it is liquid. Continually stiring the mixture, either by picking up the beaker and swirling it, or using a glass stir rod. The mixture will melt and if you look close you will see swirls in the mixture. Keep heating it till the mixture is clear with no swirls in it. Then I measure out my oil in a large syringe and I just add it to the beaker. You never take it off the heat, time it so that when your mixture has no swirls you can add the oil. You will again now see swirls in your mixture, continue heating again till there are no swirls. This whole process up to this point will take about 10 minutes of heating. Now that the oil is added and there are no swirls let it cool. Draw it all up into a large syringe (I use a 60ml) and run it through a whatman .45um filter. If you ever have tried this your forearm will be killing you after about 10mls. A trick to filtering is to put the 60ml syringe into a caulk gun. Dont squeeze to hard though because you will blow out the whatman. But the caulk gun works real well.
The oven thing is over kill in my opinion. The ba and bb will sterilize the solution as well as preserve it in the vial. The whatman will take out any impurities also. I have done this several dozen times and never had a problem.
You can get filtered oils but you will pay more for them, and why your going to filter it yourself with the whatman anyway. My buddy who taught me to brew uses olive oil from the supermarket. I personally use grape seed. You can get everything you need from
Medical and Lab Supplies | Research Laboratory Supply Inc.
This is just the way I do it not trying to say your way is wrong just my way.
you mentioned that bb will sterilize the solution, this is incorrect....bb only hold the compound together. ba is the sterilizer.
another thing is you have to make sure your solution never goes above, say....275 degrees....if you use the process you mentioned.
besides those 2 things....it is a very effective way to homebrew.
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
----
-
Your right the bb is what suspends (for lack of a better word) the hormone in the oil so it doesnt re solidify. But I dont think 275 degrees will degrade the hormone much, I have actually cooked a batch of a custom blend I made on time of Test E, Masteron, and EQ in the microwave after the solution crashed after a couple of days. After microwaving for a minute the oil was just starting to boil. I wasnt going to throw it away since Masteron is 12 bucks a gram so I shot it. To my surprise my balls still shrunk up and I had a great 20 week cycle off it.
----
-
Originally Posted by
inhiding
Your right the bb is what suspends (for lack of a better word) the hormone in the oil so it doesnt re solidify. But I dont think 275 degrees will degrade the hormone much, I have actually cooked a batch of a custom blend I made on time of Test E, Masteron, and EQ in the microwave after the solution crashed after a couple of days. After microwaving for a minute the oil was just starting to boil. I wasnt going to throw it away since Masteron is 12 bucks a gram so I shot it. To my surprise my balls still shrunk up and I had a great 20 week cycle off it.
yeah bud, i think you misread my post....I said it was probably not a good idea to go over 275 degrees. I think a good rule of thumb is between 212 and 275 degrees.
when you said you put it in the microwave and it just started to boil....your gear was only around 212 degrees. The boiling point is 212 degrees and if it just started to boil...it was not far from that number. which is ideal and why your gear worked.
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
----
-
Thanks for share heavy iron know his shit
----
-
I see a lot of people using syringes. I am interested in the hand pump process. Any info on that? I'm hoping to get the entire list of supplies from reading threads and stickies but any quick help is appreciated. Thanks in advance
----
-
I'm getting ready to do my first home brew. Can anyone give me recipe for sus 250mg per ml useing cotton seed oil and oral to liquid of aromasin ?
Last edited by USMC51683; 10-18-2017 at 12:28 AM.
----
-
New to homwbrewing
Very good info, thank u all. Gonna buy some equipment and get started asap. Any recommendation on which site to buy raws? Pureraws or purplep? Anyone more legit thwn thw others? And info or insight would be appreciated. Ty
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
----
-
whats a good discrete site to buy from for equipment?
----
-
Love it!!! Knowledge is power!!!
----
Bookmarks