Originally posted by heavyiron

Several years ago, I learned how to convert pellets into injectible tren because my boyfriend (bless him) was useless with this kind of thing. I'd much rather he (and all of you) get the proper knowledge and a safe product than to buy from a UG that is probably converting in the bathroom sink. Once I found out how to get my hands on powders, I realized how easy and cost effective it is to convert them.

All the items needed to convert powders to injectable are easily procured online. Remember that you don't have to buy your supplies from a company that caters to bodybuilders. (these companies are usually more expensive because they know what you're using their stuff for.)

The only exception I've found is www.researchsupply.net. They have have bulk and retail pricing and are reliable. Remember that you can also buy from chemical supply houses, medical, and science supply online. Do a Google search for "science supplies" and you'll be surprised at what you can find for a very reasonable price.

Chemicals you'll need for almost every conversion:

BB: Benzyl benzoate
BA: Benzyl alcohol (make sure that you do not exceed 5% BA for any of the conversions)

For Liquid Orals:
PEG 300: Polyethylene Glycol

Oils:
Sesame oil is good, and so is grape see oil. Stay away from the thicker oils, and make sure you don't have an alergy to the oil you're using (walnut, for example).

Supplies:
Some companies sell sterile vials with the stopper and crimper already on them. This is good if you have only a small amount to make or only convert every once in a while. Remember to use a venting needle with these when adding your final conversion to them. (transfer air out while putting the product in.)


Syringes 3cc & 5/10cc or bigger
18 or 20 gauge needles to vent and to transfer
Vials/beakers/glass measuring cups for mixing - heat proof
Sterile Vials or vials/stoppers/crimper for your product
sterile filters - whatman or equivelent
plastic or glass mixing spoons/swizzles. No metal
shallow pan to sterilize vials and to heat up mixtures


These recipes are not mine. They are courtesy of KIAN PHILLIPS -- BSc/SpSc - CPT . I have made almost all of the recipes that follow except Winstrol. I also have not capped any powders, but the recipes are here. If you have questions about these recipes that I cannot answer, I'll contact Kian and try to get the answer for you.

Good Luck!


The procedures for each conversion are almost identical but the measurements differ so pay close attention to this fact.


-------------------------------------------------------

Conversions and Information listed on this page:
  • Deca-Durabolin - nandrolone decanoate -
  • Equipoise - boldenone undecylenate -
  • Test Cypionate
  • Test Enanthate
  • Test Propionate
  • Trenbolone (non pellet form)
  • Winstrol (injectable)
  • Anadrol
  • Anavar
  • Armidex
  • Clomid
  • Dianabol
  • Femara
  • Nolvadex
  • Proviron
  • Winstrol (oral)
  • Capping Powders
-------------------------------------------------------



Test Enanthate

Powder: 5 grams
Produces: 20 ml @ 250 mg/ml

Requirements:
  • 5 grams testosterone enanthate
  • 15.25 ml sesame oil
  • Benzyl Alcohol 1ml 5% BA
  • Syringes 3cc & 5/10cc
  • 18 or 20 gauge needles
  • Vial
  • Sterile Vial
  • Whatman sterile filter
Procedure:
  • measure 5 grams of powder
  • place the powder in the vial
  • add BA to the vial
  • heat the oil in a suitable container in the oven to a minimum of 212 degrees F to sterilise it (it will likely be necessary to use slightly more oil than listed as you will not be able to utilise all of it)
  • add the oil to the vial but save 2 ml of oil in the syringe for later
  • gently shake the vial.
  • reheat the mixture if necessary by placing the vial in a frying pan and place it on the eye of the stove
  • place an 18 or 20 gauge needle in the sterile vial and attach the Whatman sterile filter
  • place another needle in the sterile vial to relieve the pressure
  • draw out the solution with a syringe and run it though the Whatman filter
  • take the other syringe with 2 ml of oil (saved previously) and run it through the Whatman filter into the solution.
Test Enanthate

Powder: 10 grams
Produces: 40 ml @ 250 mg/ml

Requirements:
  • 10 grams testosterone enanthate
  • Benzyl Alcohol 2ml 5% BA
  • 30.5 ml sesame oil
  • Syringes 3cc & 5/10cc
  • 18 or 20 gauge needles
  • Vial
  • Sterile Vial
  • Whatman sterile filter
Procedure:
  • measure 10 grams of powder
  • place the powder in the vial
  • add BA to the vial
  • heat the oil in a suitable container in the oven to a minimum of 212 degrees F to sterilise it (it will likely be necessary to use slightly more oil than listed as you will not be able to utilise all of it)
  • add the oil to the vial but save 2 ml of oil in the syringe for later
  • gently shake the vial.
  • reheat the mixture if necessary by placing the vial in a frying pan and place it on the eye of the stove
  • place an 18 or 20 gauge needle in the sterile vial and attach the Whatman sterile filter
  • place another needle in the sterile vial to relieve the pressure
  • draw out the solution with a syringe and run it though the Whatman filter
  • take the other syringe with 2 ml of oil (saved previously) and run it through the Whatman filter into the solution.
Test Cypionate

Powder: 5 grams
Produces: 20 ml @ 250 mg/ml

Requirements:
  • 5 grams testosterone cypionate
  • 15.25 ml sesame oil
  • Benzyl Alcohol 1 ml 5% BA
  • Syringes 3cc & 5/10cc
  • 18 or 20 gauge needles
  • Vial
  • Sterile Vial
  • Whatman sterile filter
Procedure:
  • measure 5 grams of powder
  • place the powder in the vial
  • add BA to the vial
  • heat the oil in a suitable container in the oven to a minimum of 212 degrees F to sterilise it (it will likely be necessary to use slightly more oil than listed as you will not be able to utilise all of it)
  • add the oil to the vial but save 2 ml of oil in the syringe for later
  • gently shake the vial.
  • reheat the mixture if necessary by placing the vial in a frying pan and place it on the eye of the stove
  • place an 18 or 20 gauge needle in the sterile vial and attach the Whatman sterile filter
  • place another needle in the sterile vial to relieve the pressure
  • draw out the solution with a syringe and run it though the Whatman filter
  • take the other syringe with 2 ml of oil (saved previously) and run it through the Whatman filter into the solution.
Test Cypionate

Powder: 10 grams
Produces: 40 ml @ 250 mg/ml

Requirements:
  • 10 grams testosterone cypionate
  • 30.5 ml sesame oil
  • Benzyl Alcohol 2 ml 5% BA
  • Syringes 3cc & 5/10cc
  • 18 or 20 gauge needles
  • Vial
  • Sterile Vial
  • Whatman sterile filter
Procedure:
  • measure 10 grams of powder
  • place the powder in the vial
  • add BA to the vial
  • heat the oil in a suitable container in the oven to a minimum of 212 degrees F to sterilise it (it will likely be necessary to use slightly more oil than listed as you will not be able to utilise all of it)
  • add the oil to the vial but save 2 ml of oil in the syringe for later
  • gently shake the vial.
  • reheat the mixture if necessary by placing the vial in a frying pan and place it on the eye of the stove
  • place an 18 or 20 gauge needle in the sterile vial and attach the Whatman sterile filter
  • place another needle in the sterile vial to relieve the pressure
  • draw out the solution with a syringe and run it though the Whatman filter
  • take the other syringe with 2 ml of oil (saved previously) and run it through the Whatman filter into the solution.
Equipoise - boldenone undecylenate -

Note: Equipoise - boldenone undecylenate - is liquid at room temperature so use the following conversion: 1 ml of EQ = 1.18 grams

Powder: 5 grams
Produces: 25 ml @ 200 mg/ml

Requirements:
  • 5 grams Equipoise - boldenone undecylenate -
  • 20.50 ml sesame oil
  • Benzyl Alcohol 0.75 ml 3% BA
  • Syringes 3cc & 5/10cc
  • 18 or 20 gauge needles
  • Vial
  • Sterile Vial
  • Whatman sterile filter
Procedure:
  • measure 5 grams of powder
  • place the powder in the vial
  • add BA to the vial
  • heat the oil in a suitable container in the oven to a minimum of 212 degrees F to sterilise it (it will likely be necessary to use slightly more oil than listed as you will not be able to utilise all of it)
  • add the oil to the vial but save 2 ml of oil in the syringe for later
  • gently shake the vial.
  • reheat the mixture if necessary by placing the vial in a frying pan and place it on the eye of the stove
  • place an 18 or 20 gauge needle in the sterile vial and attach the Whatman sterile filter
  • place another needle in the sterile vial to relieve the pressure
  • draw out the solution with a syringe and run it though the Whatman filter
  • take the other syringe with 2 ml of oil (saved previously) and run it through the Whatman filter into the solution.
Equipoise - boldenone undecylenate -

Note: Equipoise - boldenone undecylenate - is liquid at room temperature so use the following conversion: 1 ml of EQ = 1.18 grams

Powder: 10 grams
Produces: 50 ml @ 200 mg/ml

Requirements:
  • 10 grams Equipoise - boldenone undecylenate -
  • 41 ml sesame oil
  • Benzyl Alcohol 1.5 ml 3% BA
  • Syringes 3cc & 5/10cc
  • 18 or 20 gauge needles
  • Vial
  • Sterile Vial
  • Whatman sterile filter
Procedure:
  • measure 10 grams of powder
  • place the powder in the vial
  • add BA to the vial
  • heat the oil in a suitable container in the oven to a minimum of 212 degrees F to sterilise it (it will likely be necessary to use slightly more oil than listed as you will not be able to utilise all of it)
  • add the oil to the vial but save 2 ml of oil in the syringe for later
  • gently shake the vial.
  • reheat the mixture if necessary by placing the vial in a frying pan and place it on the eye of the stove
  • place an 18 or 20 gauge needle in the sterile vial and attach the Whatman sterile filter
  • place another needle in the sterile vial to relieve the pressure
  • draw out the solution with a syringe and run it though the Whatman filter
  • take the other syringe with 2 ml of oil (saved previously) and run it through the Whatman filter into the solution.
Note: If you have more than the equivalent of 10 grams of Equipoise - boldenone undecylenate - , it is recommended that you do the conversion all at the same time to avoid having to measure and calculate 5 or 10 gram equivalents each time.


Test testosterone propionate

Powder: 5 grams
Produces: 50 ml @ 100 mg/ml

Requirements:
  • 5 grams test testosterone propionate
  • 36.25 ml sesame oil
  • Benzyl Alcohol 2.5 ml 5% BA
  • Benzyl Benzoate 7.5 ml 15% BB
  • Syringes 3cc & 5/10cc
  • 18 or 20 gauge needles
  • Vial
  • Sterile Vial
  • Whatman sterile filter
Procedure:
  • measure 5 grams of powder
  • place the powder in the vial
  • add BA to the vial
  • add BB to the vial
  • heat the oil in a suitable container in the oven to a minimum of 212 degrees F to sterilise it (it will likely be necessary to use slightly more oil than listed as you will not be able to utilise all of it)
  • add the oil to the vial but save 2 ml of oil in the syringe for later
  • gently shake the vial.
  • reheat the mixture if necessary by placing the vial in a frying pan and place it on the eye of the stove
  • place an 18 or 20 gauge needle in the sterile vial and attach the Whatman sterile filter
  • place another needle in the sterile vial to relieve the pressure
  • draw out the solution with a syringe and run it though the Whatman filter
  • take the other syringe with 2 ml of oil (saved previously) and run it through the Whatman filter into the solution.
Test testosterone propionate

Powder: 10 grams
Produces: 100 ml @ 100 mg/ml

Requirements:
  • 10 grams test testosterone propionate
  • 72.5 ml sesame oil
  • Benzyl Alcohol 5 ml 5% BA
  • Benzyl Benzoate 15 ml 15% BB
  • Syringes 3cc & 5/10cc
  • 18 or 20 gauge needles
  • Vial
  • Sterile Vial
  • Whatman sterile filter
Procedure:
  • measure 10 grams of powder
  • place the powder in the vial
  • add BA to the vial
  • add BB to the vial
  • heat the oil in a suitable container in the oven to a minimum of 212 degrees F to sterilise it (it will likely be necessary to use slightly more oil than listed as you will not be able to utilise all of it)
  • add the oil to the vial but save 2 ml of oil in the syringe for later
  • gently shake the vial.
  • reheat the mixture if necessary by placing the vial in a frying pan and place it on the eye of the stove
  • place an 18 or 20 gauge needle in the sterile vial and attach the Whatman sterile filter
  • place another needle in the sterile vial to relieve the pressure
  • draw out the solution with a syringe and run it though the Whatman filter
  • take the other syringe with 2 ml of oil (saved previously) and run it through the Whatman filter into the solution.
Deca-Durabolin - nandrolone decanoate -

Powder: 5 grams
Produces: 25 ml @ 200 mg/ml

Requirements:
  • 5 grams Deca-Durabolin - nandrolone decanoate - - powder
  • 18.75 ml sesame oil
  • Benzyl Alcohol 1.25 ml 5% BA
  • Benzyl Benzoate 1.25 ml 5% BB
  • Syringes 3cc & 5/10cc
  • 18 or 20 gauge needles
  • Vial
  • Sterile Vial
  • Whatman sterile filter
Procedure:
  • measure 5 grams of powder
  • place the powder in the vial
  • add BA to the vial
  • add BB to the vial
  • heat the oil in a suitable container in the oven to a minimum of 212 degrees F to sterilise it (it will likely be necessary to use slightly more oil than listed as you will not be able to utilise all of it)
  • add the oil to the vial but save 2 ml of oil in the syringe for later
  • gently shake the vial.
  • reheat the mixture if necessary by placing the vial in a frying pan and place it on the eye of the stove
  • place an 18 or 20 gauge needle in the sterile vial and attach the Whatman sterile filter
  • place another needle in the sterile vial to relieve the pressure
  • draw out the solution with a syringe and run it though the Whatman filter
  • take the other syringe with 2 ml of oil (saved previously) and run it through the Whatman filter into the solution.
Deca-Durabolin - nandrolone decanoate -

Powder: 10 grams
Produces: 50 ml @ 200 mg/ml

Requirements:
  • 10 grams Deca-Durabolin - nandrolone decanoate - - powder
  • 37.5 ml sesame oil
  • Benzyl Alcohol 2.5 ml 5% BA
  • Benzyl Benzoate 2.5 ml 5% BB
  • Syringes 3cc & 5/10cc
  • 18 or 20 gauge needles
  • Vial
  • Sterile Vial
  • Whatman sterile filter
Procedure:
  • measure 10 grams of powder
  • place the powder in the vial
  • add BA to the vial
  • add BB to the vial
  • heat the oil in a suitable container in the oven to a minimum of 212 degrees F to sterilise it (it will likely be necessary to use slightly more oil than listed as you will not be able to utilise all of it)
  • add the oil to the vial but save 2 ml of oil in the syringe for later
  • gently shake the vial.
  • reheat the mixture if necessary by placing the vial in a frying pan and place it on the eye of the stove
  • place an 18 or 20 gauge needle in the sterile vial and attach the Whatman sterile filter
  • place another needle in the sterile vial to relieve the pressure
  • draw out the solution with a syringe and run it though the Whatman filter
  • take the other syringe with 2 ml of oil (saved previously) and run it through the Whatman filter into the solution.
trenbolone

Note: this conversion is not for the pellet form

Powder: 5 grams
Produces: 50 ml @ 100 mg/ml

Requirements:
  • 5 grams trenbolone
  • 43.75 ml sesame oil
  • Benzyl Alcohol 2.5 ml 5% BA
  • Syringes 3cc & 5/10cc
  • 18 or 20 gauge needles
  • Vial
  • Sterile Vial
  • Whatman sterile filter
Procedure:
  • measure 5 grams of powder
  • place the powder in the vial
  • add BA to the vial
  • heat the oil in a suitable container in the oven to a minimum of 212 degrees F to sterilise it (it will likely be necessary to use slightly more oil than listed as you will not be able to utilise all of it)
  • add the oil to the vial but save 2 ml of oil in the syringe for later
  • gently shake the vial.
  • reheat the mixture if necessary by placing the vial in a frying pan and place it on the eye of the stove
  • place an 18 or 20 gauge needle in the sterile vial and attach the Whatman sterile filter
  • place another needle in the sterile vial to relieve the pressure
  • draw out the solution with a syringe and run it though the Whatman filter
  • take the other syringe with 2 ml of oil (saved previously) and run it through the Whatman filter into the solution.
trenbolone

Note: this conversion is not for the pellet form

Powder: 10 grams
Produces: 100 ml @ 100 mg/ml

Requirements:
  • 10 grams trenbolone
  • 87.5 ml sesame oil
  • Benzyl Alcohol 5 ml 5% BA
  • Syringes 3cc & 5/10cc
  • 18 or 20 gauge needles
  • Vial
  • Sterile Vial
  • Whatman sterile filter
Procedure:
  • measure 10 grams of powder
  • place the powder in the vial
  • add BA to the vial
  • heat the oil in a suitable container in the oven to a minimum of 212 degrees F to sterilise it (it will likely be necessary to use slightly more oil than listed as you will not be able to utilise all of it)
  • add the oil to the vial but save 2 ml of oil in the syringe for later
  • gently shake the vial.
  • reheat the mixture if necessary by placing the vial in a frying pan and place it on the eye of the stove
  • place an 18 or 20 gauge needle in the sterile vial and attach the Whatman sterile filter
  • place another needle in the sterile vial to relieve the pressure
  • draw out the solution with a syringe and run it though the Whatman filter
  • take the other syringe with 2ml of oil (saved previously) and run it through the Whatman filter into the solution.
Winstrol

Note: there is a tendency to ruin the product during conversion so only use one gram at a time

Powder: 1 gram
Produces: 20 ml at 50 mg/ml

Requirements:
  • 1 gram of winstrol
  • one 20 ml glass vial or larger
  • one 20 ml sterile glass vial or larger
  • one 0.45 Whatman sterile syringe filter
  • two 5 or 10 ml syringes
  • two 3 ml syringes
  • three 18 or 20 gauge pins
  • two 22 gauge pins
  • 17 ml of sesame seed oil
  • 0.2 ml of benzyl alcohol
  • 2 ml of Mr.T super solvent
Procedure:
  • measure one gram of powder
  • draw out 2 ml of the Mr. T super solvent using one of the 3 ml syringes
  • place the measured powder in the open vial and add the solvent
  • place the rubber stopper back on the vial and put one of the 20 gauge pins in the stopper
  • place the vial in a small pan and place the pan on the eye of the stove
  • heat until the powder dissolves into a liquid (usually around 239.8-242 degrees F)
  • turn off the heat and let it cool down in the pan to room temperature (approx. 15 minutes)
  • heat the oil in a suitable container in the oven until it reaches a minimum of 212 degrees F to sterilise it (it will be necessary to use slightly more oil than is required as all of it will not be able to be utilised)
  • draw out 0.2 ml of benzyl alcohol (this will account for 1% of the solution so make sure the measurement is correct)
  • add the benzyl alcohol to the solution in the vial and shake very gently
  • draw out the oil with the 10 ml syringe (make sure the oil has cooled down somewhat before doing this)
  • add 15 ml of the oil (saving 2 ml for later) to the solution in the vial and shake very gently Note: If the winstrol begins to clump back up, reheat the solution (place in a pan, put the pan on the eye of the stove and heat until it liquefies again) and allow it to cool down slowly
  • place one of the 18 gauge pins in the sterile, unopened vial and attach the Whatman sterile filter
  • draw out the solution using the other 10 ml syringe, attach to the filter, and slowly press the solution out into the sterile vial
  • use the previously saved 2 ml of oil in the other syringe and run it through the filter to ensure that all the Winstrol passes through
  • after the filtering process, leave the pin in the sterile vial and remove the filter
  • place the vial in a pan and place the pan on the eye of the stove
  • heat for 15-20 minutes, remove from heat, and let it cool down to room temperature (approx. 15 minutes)
The finished solution will be light-gold in colour.
Ensure that you follow the guidelines carefully for this conversion.

For conversions larger than one gram, refer to the powder conversion calculator at the top of this page.


-------------------------------------------------------


POWDER TO LIQUID ORAL CONVERSIONS:


Anadrol
Powder: per 1 gram of Oxymetholone
Produces: Highest concentration made - 50 mg/ml

Requirements:
  • 1 gram of Oxymetholone powder
  • 1 beaker suitable for holding the volume of liquids
  • 8.4 ml of PEG 300
  • 10.5 ml 190 Proof Grain Alcohol
Anavar
Powder: per 1 gram of Oxandrolone
Produces: Highest concentration made - 20 mg/ml

Requirements:
  • 1 gram of Oxandrolone powder
  • 1 beaker suitable for holding the volume of liquids
  • 9.8 ml of PEG 300
  • 39.2 ml of 190 Proof Grain Alcohol
Armidex
Powder: per 1 gram of Anastrozole
Produces: Highest concentration made - 5 mg/ml

Requirements:
  • 1 gram of Anastrozole powder
  • 1 beaker suitable for holding the volume of liquids
  • 19.9 ml of PEG 300
  • 179.1 ml of 190 Proof Grain Alcohol
Clomid
Powder: per 1 gram of Clomiphene Citrate
Produces: Highest concentration made - 50 mg/ml

Requirements:
  • 1 gram of Clomiphene Citrate
  • 1 beaker suitable for holding the volume of liquids
  • 7.6 ml of Glycerol
  • 11.3 ml of 190 Proof Grain Alcohol
Clomid
Powder: per 1 gram of Clomiphene Citrate
Produces: Highest concentration made - 50 mg/ml

Requirements:
  • 1 gram of Clomiphene Citrate
  • 1 beaker suitable for holding the volume of liquids
  • 8.4 ml of PEG 600
  • 10.5 ml of 190 Proof Grain Alcohol
Dianabol
Powder: per 1 gram of Methandrostenolone
Produces: Highest concentration made - 50 mg/ml

Requirements:
  • 1 gram of Methandrostenolone powder
  • 1 beaker suitable for holding the volume of liquids
  • 19 ml of 190 Proof Grain Alcohol
Femara
Powder: per 1 gram of Letrozole
Produces: Highest concentration made - 5 mg/ml

Requirements:
  • 1 gram of Letrozole powder
  • 1 beaker suitable for holding the volume of liquids
  • 19.9 ml of PEG 300
  • 179.1 ml of 190 Proof Grain Alcohol
Nolvadex
Powder: per 1 gram of Tamoxifen Citrate
Produces: Highest concentration made - 20 mg/ml

Requirements:
  • 1 gram of Tamoxifen Citrate
  • 1 beaker suitable for holding the volume of liquids
  • 19.6 ml of Glycerol
  • 29.4 ml of 190 Proof Grain Alcohol
Nolvadex
Powder: per 1 gram of Tamoxifen Citrate
Produces: Highest concentration made - 20 mg/ml

Requirements:
  • 1 gram of Tamoxifen Citrate
  • 1 beaker suitable for holding the volume of liquids
  • 9.8 ml of PEG 600
  • 39.2 ml of 190 Proof Grain Alcohol
Proviron
Powder: per 1 gram of Mesterolone
Produces: Highest concentration made - 50 mg/ml

Requirements:
  • 1 gram of Mesterolone
  • 1 beaker suitable for holding the volume of liquids
  • 8.4 ml of PEG 300
  • 10.5 ml of 190 Proof Grain Alcohol
Winstrol
Powder: per 1 gram of Stanozolol
Produces: Highest concentration made - 25 mg/ml

Requirements:
  • 1 gram of Stanozolol
  • 1 beaker suitable for holding the volume of liquids
  • 7.8 ml of PEG 300
  • 31.2 ml of 190 Proof Grain Alcohol
For all of the above conversions requiring PEG and 190 Proof Alcohol, use the following procedure:
  • place a sufficient amount of water in a pan and place on the stove
  • remove from heat when the water reaches boiling temperature
  • place the powder and the PEG in the beaker
  • immerse the beaker in the pan of water so that the water is level with the top of the contents of the beaker
  • gently swirl or stir the contents of the beaker until the solution is clear (reheat the water if necessary)
  • remove the beaker from the water
  • allow the PEG to cool down
  • slowly add the 190 Proof Alcohol to the mixture
  • gently stir until fully mixed
For all of the above conversions where PEG is not required, use the following procedure:
  • mix powder and 190 Proof Alcohol in the beaker
  • gently swirl or stir the contents of the beaker until the solution is clear
  • the majority of powders which do not require PEG will dissolve readily but for those that are troublesome, refer to the heating procedure as outlined above
In the event that 190 Proof Grain Alcohol (EverClear) is unavailable, then substitute Bacardi 151.

Flavoured oils can also be added to mask the taste if that is your preference.