Brewing for second time

**TEPENEX** · 05-03-2017, 02:14 AM

Originally Posted by Rmewrench

That's not a risk im willing to take. When you see someone loose 75% If their quad from dirty gear,you might feel differently. Sterilization is one thing, there are all kinds of other contaminants. Your choice. Not my problem honestly.

DWGO has a video somewhere of this Kobra that the way to do this and it is horrible advice to even have in a thread IMO. DO ONE SHOULD DO THIS! its on you tube google it you will filter after that! lol

**TEPENEX** · 05-03-2017, 02:16 AM

Originally Posted by bigmills

Right now I have a Nalgene rapid flow with nylon filter membrane. I also have a few whatman zap cap nylon bottle top filters. I'm going to use a glass media bottle on the bottom of them do you think they will hold enough to get about 250 ml through them? next time I will order pvfd..

Sent from my SM-G935V using Tapatalk

Are the zapcaps 250ml or 500ml? you can usually get over 500mls out of 500ml zapcap CR if its regular doses.

**littlefrank** · 05-03-2017, 02:34 AM

Filter is a must. Heat alone isn't enough to kill everything. Reason why they make filters and a reason why heat itself isn't the preferred method

**TEPENEX** · 05-03-2017, 02:42 AM

Originally Posted by littlefrank

Filter is a must. Heat alone isn't enough to kill everything. Reason why they make filters and a reason why heat itself isn't the preferred merits.

Sent from my iPhone using Tapatalk

and why BA is used for preservation and no bactieria.

**bigmills** · 05-03-2017, 02:47 AM

Originally Posted by TEPENEX

Are the zapcaps 250ml or 500ml? you can usually get over 500mls out of 500ml zapcap CR if its regular doses.

There 500ml I was going to try to get 500ml done tomorrow. I was thinking about heating the oil to 120 degrees before running it through. Do you think that's hot enough or to hot? And I appreciate the feedback brother..

Sent from my SM-G935V using Tapatalk

**Kobra** · 05-03-2017, 02:54 AM

Originally Posted by TEPENEX

DWGO has a video somewhere of this Kobra that the way to do this and it is horrible advice to even have in a thread IMO. DO ONE SHOULD DO THIS! its on you tube google it you will filter after that! lol

If something is sterile then there is no risk of infection. Heat is a very effective method of sterilisation. Seems like the idea of filtering though a membrane has been imbedded as the only way of sterilising something. This is not the case... anyway each to their own.

**bigmills** · 05-03-2017, 02:57 AM

Originally Posted by bigmills

There 500ml I was going to try to get 500ml done tomorrow. I was thinking about heating the oil to 120 degrees before running it through. Do you think that's hot enough or to hot? And I appreciate the feedback brother..

Sent from my SM-G935V using Tapatalk

One other thing.what should I run through the filter if anything before I run the the oil through it. I read it was good to get it wet first?

Sent from my SM-G935V using Tapatalk

**TEPENEX** · 05-03-2017, 09:14 PM

Originally Posted by bigmills

There 500ml I was going to try to get 500ml done tomorrow. I was thinking about heating the oil to 120 degrees before running it through. Do you think that's hot enough or to hot? And I appreciate the feedback brother..

Sent from my SM-G935V using Tapatalk

OK don't get Fahrenheit and Celsius confused as a lot of lab equipment is metric. I think you should be fine with that 120 Fahrenheit just keep stirring and stirring.
Let it cool down before going through the filter or your going to melt it with heat. Going too high with heat will kill the hormone so be careful.

**TEPENEX** · 05-03-2017, 09:24 PM

Originally Posted by Kobra

If something is sterile then there is no risk of infection. Heat is a very effective method of sterilisation. Seems like the idea of filtering though a membrane has been imbedded as the only way of sterilising something. This is not the case... anyway each to their own.

Ok getting technical here I guess, Its not brologic that is being used here. YES it can be sterile if heated but the air around you is dirty and floating with particles, are you in a completely 100% lab setting with hepa air filtration circulating 6 times an hour? Or is this process under a hood? If so then I think it might work. I would advice everyone use a filter at .22um no matter what. If you want to do it right I would use a .45um first then filter through a .22um this is best with the dirty compounds like tren and deca.

**Kobra** · 05-03-2017, 10:56 PM

Originally Posted by TEPENEX

DWGO has a video somewhere of this Kobra that the way to do this and it is horrible advice to even have in a thread IMO. DO ONE SHOULD DO THIS! its on you tube google it you will filter after that! lol

Do you have a link to the video? Searched youtube however i couldnt find it.